PTFM3765
Installation Instructions
Visit the Premier Mounts website at http://www.mounts.com
Page
11
Installing the Wall Plate (cont’d)
Step 6
Insert one (1)
5
/
16
″
x 3
″
lag bolt and one (1)
5
/
16
″
washer into the pilot hole
Tighten the lag bolt using a socket wrench and ½
″
socket.
Do not overtighten the lag bolts when attaching
the wall plate to the wall. Improper installation may
result in personal injury or property damage.
Proceed to the
“Mounting Hardware Installation”
section.
The supplied
7
/
16
″
plastic anchors and
5
/
16
″
lag bolts
must be used for concrete installation.
You will need a
7
/
16
″
masonry drill bit, which is
available at your closest hardware store.
Concrete Installation
Two people are recommended for this step; one
person to level the wall plate and another person to
mark the mounting locations.
Place the wall plate against the wall in the desired
viewing location.
Align the bottom of the wall plate with the pencil
mark you made for Distance C.
Level the wall plate.
Use a pencil and mark three (3) mounting locations
where you will be drilling holes for the plastic
anchors.
Step 1
Example of
7
/
16
″
Masonry Drill Bit (Not Included)
Set the wall plate to one side in a safe location.
Use the mounting hole in the connector plate for the
center mounting location.
Mounting Hole
Connector Plate
5
/
16
″
x 3
″
Lag Bolts
7
/
16
″
Plastic Anchors
X
X