PP-FCTA-QL
1-½˝ Pipe
M5 x 16mm Screw
Ceiling Plate Assembly
Tiles
T-Bar Frame Rails
Securing 1
½˝
NPT to the PP-FCTA-QL
Secure the 1 ½″ (NPT) pipe to the ceiling plate and
tighten by using one (1) M5 x 16mm combo head screw
to the plate.
The M5 x 16mm combo head screw must be used
to stabilize the 1 ½″ (NPT) pipe.
Make sure the camera supports one (1) 1/4”-20 screw.
1. Determine which screw hole on the upper adapter plate you will use to attach the camera.
2. Insert one (1) 1/4”-20 x 2 3/4” pan Phillips head screw (commercially available) through
one (1) wing nut (commercially available) and the desired screw hole.
The screw should go through both the upper and lower adapter plates. It will later be
used to mount the camera).
Camera Screw Installation (optional)
Do not overtighten the mounting screw.
1/4”-20 x 2 3/4”
combo head screw
(commercially
available)
Jam nut (commercially
available)
1/4”-20 threaded insert on
camera
1/4”-20 camera screw
holes
Page 13
