PP-FCTA-QL
1) Adjust the
1
/
16
˝
braided cable tension and placement so that the cable forms a 15° angle away from the
corner of the ceiling plate.
Do not overtighten the cable tension.
2) When adjusting the tension of the weight-bearing side of the Quick Lock, the
1
/
16
˝ braided
cable must be
pulled through the Quick Lock until the desired tension is attained.
3) Once attained, pull the
1
/
16
˝
braided cable through the other side of the Quick Lock.
4) Once the tension has been adjusted, be sure that there is a minimum of 6” of excess
1
/
16
˝
braided cable
on the non-weight bearing side of the Quick Lock.
5) Use cable cutters to remove any remaining
1
/
16
˝
braided cable (optional).
To relieve tension on the
1
/
16
˝
braided cable, slide the release pin on the Quick Lock.
1
/
16
˝ Braided Cable To
Ceiling Attachment
Step 5
T-Bar Frame
Ceiling Tile
Quick Lock
Excess
1
/
16
˝ Braided
Cable
Proceed to the ″Securing 1
½˝
NPT” section.
15°
Page 12
