CTM-MS2
Page 8
Visit the Premier Mounts website at http://www.mounts.com
Installation Instructions
Installing the Mounting Brackets (cont’d)
This section presumes that you have read and understood these sections:
●
Selecting the Proper Mounting Hardware
●
Universal Washer Installation
●
Universal Spacer Installation
1)
Place your flat panel screen-side down on a soft, flat surface.
2)
Identify the number and location of the thread inserts on the back of your
flat panel.
3)
Aligning the holes on each mounting bracket with the thread inserts on the
back of your flat panel.
4)
Secure each mounting bracket to your flat panel by inserting a minimum of
two (2) screws per bracket.
Do not overtighten the mounting hardware.
Attaching the Mounting Brackets to the Flat Panel
Attaching the Flat Panel to the Wall Plate
Mounting the Flat Panel
This section requires two people.
Do not release your flat panel until you are certain that top and bottom
hooks of both mounting brackets are securely seated on the upper and
lower mounting rails of the wall panel.
1)
Raise the flat panel past the top and bottom mounting rails on the wall
panel.
2)
Slide the flat panel down slowly, keeping it close to the wall.
3)
Engage the top and bottom mounting brackets to the rails of the wall plate.
Proceed to the “Mounting the Flat Panel” below.
