CTM-MS2
Page 4
Visit the Premier Mounts website at http://www.mounts.com
Installation Instructions
Installing the Wall Plate
Introduction
Directional Mounting Arrow
The Directional Mounting Arrow stamped into the CTM-MS2 wall plate
indicates which edge is the top.
Visual Centering Diamond
The Visual Centering Diamond will guide you in determining the screen
placement on the wall.
Mounting Safety
Two people are recommended to install the wall plate.
You must secure the wall plate to two (2) wall studs with four (4) lag
bolts (2 lag bolts for each stud found)
1)
Use a stud finder to determine the exact center of wall studs in the vicinity
of the wall plate.
2)
Use a pencil to mark the exact center of each of the wall studs.
Step 1
Step 2
Step 3
Two people are recommended for this step; one person to level the wall
plate and another person to mark the wall stud location.
1)
Place the wall plate against the wall in the desired viewing location.
2)
Adjust the wall plate to align the mount slots in the wall plate with the
center of the wall studs.
3)
Level the wall plate.
4)
Use a pencil to mark the upper right mounting location along the center of
the wall stud.
Drill a “pilot hole” in the center of the upper right mark using a ¼″ drill bit and
power drill.
Only use a ¼˝ drill bit when drilling pilot holes.
X
X
X
X
X
X
