CTM-MS2
Installation Instructions
Visit the Premier Mounts website at http://www.mounts.com
Page 7
Installing the Mounting Brackets (cont’d)
Griplate
™
Installation
Flat Panel
Universal Washer
Universal Spacer
Mounting Bracket
Mount Point
Mounting Screw
Premier Mounts’ Universal Washers are designed to accommodate the various
M4, M5, M6 and M8 hole sizes required by flat panels.
Do not place excessive pressure on the back of the flat panel, as this
may damage the flat panel.
The Universal Washer must be installed between the head of the
mounting screw and the mounting bracket as shown with dimples facing
down.
Does the flat panel have:
●
Recessed mount points?
●
Uneven mount points?
●
A curved back?
●
Any obstruction near the mount point?
If
Yes
, you must install Universal Spacers. Remove the mounting brackets,
Universal Washers, and mounting screws from the back of the flat panel.
Proceed to the “Universal Spacer Installation” below
.
If
No
,
skip to the “Attaching the Mounting Bracket to the Flat Panel” on
page 10
.
Universal Spacer Installation
Premier Mounts’ Universal Spacers allow you to attach the mounting bracket
to flat panels which have recessed or uneven mount points. Each Universal
Spacer adds ¼˝ to the distance between the mounting bracket and the flat
panel.
The Universal Spacers must be stacked and oriented as shown.
The Universal Spacers must only be installed between the mounting
bracket and the flat panel.
The Universal Spacers will fit M4, M5, M6 and M8 screw sizes.
Proceed to the
“Attaching the Mounting Bracket to the Flat Panel”
section.
M8
M5, M6
M4
1˝
¼˝
