background image

 3 

www.pregis.com  

38-OM225-1 

 

Always switch off the machine from the mains supply before 

freeing paper jams or lifting the top cover. 

THIS MACHINE MUST BE EARTHED 

The wires in the mains cable are coloured as such: 

GREEN/

YELLOW 

BLUE

 

BROWN

 

EARTH 

NEUTRAL 

LIVE 

It is important that this machine is installed, maintained and used correctly to 

avoid the risk of injury. 

This machine contains dangerous voltages and rotating mechanical parts. 

Safety Information 

•   Use the machine only for the purposes described in the Operating Manual. 
•  This machine is to be used only by trained personnel. 
•  Do not operate without the guards properly in place. 
•  The machine will not start with the flap in the open position. 
•  The machine will not run with the top cover or the paper off-cuts door  

  open.   
•  The machine is to be serviced or repaired only by Pregis. 

•  The machine uses a 230V(±10%), 50Hz, single-phase AC supply. 
•  To protect against electrical shock, do not immerse the plug or mains cable 

in water or spray with liquids. 

•  Unplug from the electrical supply when not in use. 
•  Do not operate this machine with a damaged mains cable or plug. 
•  To disconnect from electrical supply, grip the plug - do not pull on the 

mains cable. 

The machine is fitted with motor driven cut-off blades which operate automatically 
at the end of each cycle. Serious operator injury could result if hands are inserted 
through the outfeed flap. Care must also be taken to keep hands away from the 
paper entry slot  to avoid paper cuts or friction burns to the hand. 

The machine can be stopped at any time via the rocker switch. This cuts off 
the electrical supply to the control panel and motors. 

Содержание packmaster pro 383
























Отзывы: