Pregis packmaster pro 383, Руководство по эксплуатации

Страница: 8 / 23

8
www.pregis.com 38-OM225-1
Loading Paper
1. Noting the unwind direction, slide a
new roll of paper onto the paper
arm until the sprung retaining latch
springs up.
Single ply Two ply
4. Press and release the blue feed button
- the paper will load automatically.
The quantity display will flash ‘Ld’ whilst
the paper is loading. Once loading is
complete the display will revert to the
previous settings.
3. Rotate the wheels by hand for about
half a turn to feed-in and grip the pa-
per.
For single ply paper,
feed the sheet be-
tween the roller and
inner guide rods as
shown.
For two ply paper, feed
the inner sheet be-
tween the roller and
guide rods and the
outer sheet between
the inner and outer
guide rods as shown.
2. Pull approximately 70cm of paper from
the roll.
Feed the sheet(s) of paper into the entry
slot.
NOTE: If the machine runs out of paper in auto batch mode, the machine will automatically
continue to produce the remaining quantity of packs as soon as the paper has been loaded.
Paper Rolls