SX™ Operator Manual
©
Original Printed in English
Sharp Packaging has developed two versions of the HMI software. A non-secure version and a secure version.
Both versions will be installed on the bagger. The secure version has security login as described below.
SECURITY LOGIN
The Security Login occurs when the user selects a secured screen. A login Numeric Keypad will be automatical-
ly displayed. The login is a two step operation.
User: A blinking cursor is shown in the box next to the word. Key in the desired User number, but do not press
the enter key.
Password: Touch the entry area to the right of Password: and the blinking cursor will show up in the entry box.
Key in the correct password number for that user number and then press the enter key.
SECURITY LOGOUT
The Security Logout occurs either automatically after 15 minutes of inactivity or if the user presses a Logout but-
ton on any of the secured screens. The Logout changes back to the Home Screen.
Security is screen based and defined as three distinct users.
User 1 - Admin
User 1 can access the ADMIN SCREEN only. This is for selecting the options that are installed on the machine.
User 2 – Service
User 2 is a qualified service person. This level can access all secured screens except the ADMIN SCREEN.
The following Screens are accessible when logged in as User 2.
User 3 – Supervisor
User 3 is a supervisor/super user of the bagger. The following Screens are accessible when logged in as User 3.
NO SECURITY
When the non-secured version of HMI program is selected. The Operator can access all screens without a pass-
word.
SECURITY
INTRODUCTION
1-12
