Rewire the Equipment
You must rewire the equipment to support the PVS functionality. This section
contains procedures to rewire the following equipment to accommodate a PVS:
• Treadmill
• EFX
• AMT
• Recumbent Bike
• Upright Bike
• Climber
Before You Begin
IMPORTANT
Disconnect power to equipment before you begin.
Perform the assembly steps in the order presented.
IMPORTANT
At least two people are required to assemble the equipment. DO NOT attempt
assembly by yourself.
To rewire the equipment, you need the following new cables from the hardware
kit:
• Television (coaxial) cable
• Power cable (disconnect the power cable from the AC adapter)
NOTE
Tape the television and power cables together to make it easier to feed them
through the equipment. In addition, a fish tape (a thin metal strip with a hook
or clasp on one end, available from professional hardware vendors) can be
helpful threading cables through the long equipment tubes.
Before you begin to rewire, remove the screws that secure the console in place.
NOTE
Precor recommends that you have another person hold the console steady to
prevent it from falling while you rewire the equipment.
5