Maintenance
To keep the equipment functioning properly, perform the minor maintenance
tasks in this section at the intervals suggested. Failure to maintain the equipment
as described in this section could void the Precor Limited Warranty.
To reduce the risk of electrical shock, always disconnect the equipment
from its power source before cleaning it or performing any maintenance
tasks. If the equipment uses an optional power adapter, disconnect the
adapter.
Cleaning the PVS Screen
Precor recommends that you clean the PVS at least one time per day.
To remove dust and dirt from the PVS:
• Use a clean, soft, lint-free cloth moistened with isopropyl alcohol solution to
remove dust, dirt, and fingerprints from the screen surface. The alcohol solution
may range in strength from a 1:1 solution (total concentration between 45% and
50%) to a typical full-strength solution (normally 91% to 99%). You may also use
commercially available isopropyl alcohol solutions within this range, or flat-
screen cleaning wipes moistened with isopropyl alcohol.
• Wipe all other exposed surfaces with a soft cloth that you have moistened with a
mixture of mild soap and water. Precor recommends a solution of 30 parts of
water to 1 part of Simple Green® (for more information, visit
www.simplegreen.com).
IMPORTANT
Do not use any acidic cleaners. Doing so will weaken paint, powder coatings, and
other surface finishes and will void the Precor Limited Warranty. Never pour water
or spray liquids directly onto the screen.
Avoid using any corrosive chemicals on the console or screen.
To prevent drips from seeping into the screen or console enclosure, never spray
cleaning liquid directly onto the screen or connectors.
Apply cleaners with a soft, lint-free cloth. Avoid using gritty cloths.
19