Precor EFX 5.17, Руководство пользователя

Страница: 9 / 21

page 8
Diagram 4
Placing roller arms onto ramp.
Diagram 3 Connecting the cables.
1
Diagram 2 Positioning the front and rear
base rails close together.
2. Remove the front and rear assemblies. Diagram 2. The front assembly is com-
posed of the upright supports, handrails, display console, ramp and front cover. The
rear assembly is composed of the roller arms, foot pedals, motor and rear casing.
Place the two sections close to each other so that it will be easy to connect the
cables and secure the base rails.
3. Remove bolts and washers from the base rail. Use the supplied Allen wrench to
remove the 4 bolts and washers from the base rail. Keep the washers on the bolts
and set them within easy reach.
Rear base rail
Front base rail
Interconnect cable
RJ46 cable
Bolts and washers
4. Connect the cables. Diagram 3. Plug the connectors (RJ46 and interconnect) into
the receptacles. You’ll hear a “click” when the connection is properly secured.
Do
not force the connection. Make sure that you match the correct connector to its
receptacle.
5. Lift the rollers onto the ramp. Diagram 4. Have your assistant(s) stand next to the
front cover and face the rear casing. Position yourself next to the base rail bolt
holes. While your assistant(s) grasps the handrails and carefully slides the front
base rail toward the rear, lift the rollers onto the ramp.
2
RJ46 cable
Interconnect cable
Foot pedal
Ramp
Roller