PRECISION DIGITAL PD2-6210, Инструкция по эксплуатации

Страница: 55 / 60

PD2-6210 Helios Large Display Analog Input Batch Controller Instruction Manual
55
Function Keys & Digital I/O Available Settings
Refer to the following table for descriptions of each available function key or digital I/O setting.
Display Description
Start
Starts the batch process
Stop
Stops the batch process
srtstp
Allows the same function key to
both start and stop the batch
process
Rly d
Disable all relays until a button
assigned to
enable relays
(
Rly E
)
is pressed
Rly E
Enable all relays to function as they
have been programmed
O Hold
Hold current relay states and
analog output as they are until a
button assigned to
enable relays
(
Rly E
) is pressed
d Hold
Hold the current display value, relay
states, and analog output
momentarily while the function key
or digital input is active. The
process value will continue to be
calculated in the background.
Ln1 Hi
Display maximum display value on
line 1
Ln1 Lo
Display minimum display value on
line 1
Ln1 HL
Display maximum & minimum
display values on line 1
Ln2 Hi
Display maximum display value on
line 2
Ln2 Lo
Display minimum display value on
line 2
Ln2 HL
Display maximum & minimum
display values on line 2
Ln2 gt
Display the grand total on line 2
Ln2 bc
Display the batch count on line 2
Contrl
Directly access the control menu
Display Description
disabl
Disable the selected function key or
digital I/O
AcH
Acknowledge all active relays that
are in a manual operation mode
such as auto-manual or latching
Reset
Directly access the reset menu
Rst t
Reset the total
Rst gt
Reset the grand total
Rst bc
Reset the batch count
Rst Hi
Reset the maximum display value
Rst Lo
Reset the minimum display value
Rst HL
Reset the maximum & minimum
display values
relay
Directly access the relay menu
preset
Change the preset value
Set 2
*
Directly access the set point menu
for relay 2 (*through 8)
nmenu
Mimic the menu button functionality
(digital inputs only)
rigHt
Mimic the right arrow/F1 button
functionality (digital inputs only)
up
Mimic the up arrow/F2 button
functionality (digital inputs only)
Enter
Mimic the enter/F3 button
functionality (digital inputs only)
F On 1
*
Force relay 1 (*through 4) into the
on state. This function is used in
conjunction with a digital input
expansion module to achieve
interlock functionality. See page 45
for details about interlock relays.
Alnm 1
*
Provide indication when alarm 1
(*through 8) has been triggered
(digital outputs only)
www.calcert.com sales@calcert.com 1.888.610.7664
0
5
10
15
20
25
30