Helios Large Display Analog Input Batch Controller Instruction Manual
PD2-6210
48
Making Changes to a Password Protected Meter
If the meter is password protected, the meter will display the message
Locd
(
Locked
) when the Menu
button is pressed. Press the Enter button while the message is being displayed and enter the correct
password to gain access to the menu. After exiting the programming mode, the meter returns to its
password protected condition.
Disabling Password Protection
To disable the password protection, access the
Password
menu and enter the correct password twice, as
shown below. The meter is now unprotected until a new password is entered.
If the correct six-digit password is entered, the meter displays the message
unLoc
(
unlocked
) and the
protection is disabled until a new password is programmed.
If the password entered is incorrect, the meter displays the message
Locd
(Locked) for about two
seconds, and then it returns to Run Mode. To try again, press Enter while the
Locked
message is
displayed.
Did you forget the password?
The password may be disabled by entering a master
password once. If you are authorized to make changes,
enter the master password 508655 to unlock the meter.
www.calcert.com
1.888.610.7664
0
5
10
15
20
25
30
