PD8-6300 Pulse Input Rate/Totalizer, Counter & Tachometer
Instruction Manual
50
Advanced Features Menu
To simplify the setup process, functions not needed
for most applications are located in the
Advanced
Features
menu.
Press and hold the Menu button for three seconds to
access the advanced features of the meter.
Advanced Features Menu &
Display Messages
The following table shows the functions and
messages of the
Advanced Features
menu in the
order they appear in the menu.
Display
Parameter
Action/Setting
Gate
Gate
Enter Gate function
menu
Lo G
Low gate
Program Low gate value
Hi G
High gate
Program High gate
value
filter
Filter
Enter the Filter menu
Lo Spd
Low speed
Set the contact de-
bounce filter value
Hi Spd
High speed
Select high speed filter
Round
Round
Set the rounding value
for display variables
seriAl
Serial
Set serial
communication
parameters
SlaV Id
Slave ID
Set slave ID or meter
address
baud
Baud rate
Select baud rate
Tr dLY
Transmit delay
Set transmit delay for
serial communication
Parity
Parity
Select parity:
Even, Odd, or None with
1 or 2 stop bits
t-byt
Time byte
Set byte-to-byte timeout
SelEct
Select
Enter the Select menu
(function, cutoff, out)
Functn
Input signal
conditioning
Select linear only, other
functions are not
applicable to pulse input
Linear
Linear
Set meter for linear
function and select
number of linearization
points
Display
Parameter
Action/Setting
No PtS
Number of
points
Set meter for 2 to 32-
point linearization
CutofF
Cutoff
Set low-flow cutoff
Count
Count
Set the totals to count
up or down from a set
value
Tot C
Total count
Set the total to count up
to or down from the
programmed total value
Gtot C
Grand total
count
Set the grand total to
count up or down from
from the programmed
grand total value
AoutPr
Analog output
programming
Program analog output
parameters
Source
Source
Select source for the
4-20 mA output
O-rang
Overrange
Program mA output for
display overrange
u-rang
Underrange
Program mA output for
display underrange
nmAx
Maximum
Program maximum mA
output allowed
nmin
Minimum
Program minimum mA
output allowed
Calib
Calibrate
Calibrate 4-20 mA
output (internal
reference source used
for scaling the output)
4 nmA
4 mA output
Enter mA output value
read by milliamp meter
with at least 0.001 mA
resolution
20 nmA
20 mA output
Enter mA output value
read by milliamp meter
with at least 0.001 mA
resolution
user
User I/O
Assign function keys
and digital I/O
F1
F1 function
key
Assign F1 function key
F2
F2 function
key
Assign F2 function key
F3
F3 function
key
Assign F3 function key
F4
F4 function
Assign F4 function
(digital input)
dI I
Digital input 1
Assign digital input 1-4
dO 1
Digital output 1
Assign digital output 1-4
Diag
Diagnostics
Display parameter
settings
LED t
LED test
Test all LEDs
(press menu to exit test)
Info
Information
Display software number
and version
Erase
Erase
Erase MeterView Pro
software stored in
meter’s memory
Содержание ProtEX-MAX PD8-6300
Страница 2: ...2 ...
Страница 62: ...PD8 6300 Pulse Input Rate Totalizer Counter Tachometer Instruction Manual 62 NOTES ...
Страница 63: ......