manualshive.com logo in svg

Precision Digital Corporation ConsoliDator Plus PD9000, Инструкция по эксплуатации, Страница: 28 / 36

Поделиться
Скачать
Precision Digital Corporation ConsoliDator Plus PD9000 Скачать руководство пользователя страница 28

www.predig.com

   PD9000 

Multivariable Controller

28

Ethernet Communications

Device:

 Lantronix Xport-05

Protocol:

 Modbus TCP/IP (Default)

Modbus UDP/IP

 

Modbus RTU Over TCP/IP

Modbus RTU Over UDP/IP

Port Settings (Do Not Change):

Protocol: RS-232

Baud Rate: 9600

Data Bits: 8

Flow Control: None

Parity: None, Stop Bits: 1

Network Stack:

 IPv4

Ethernet Mac/Phy:

 10/100 Mbps

Additional Specifications:

 Refer to the Lantronix Webpage

https://www.lantronix.com/products/xport

Ethernet Port Configuration:

 Use the System menu for basic 

Ethernet configuration or download the Lantronix DeviceIntaller 

software to fully configure the Ethernet port.

https://www.lantronix.com/products/xport

See the

 

PD9000 manual

 

for instructions.

Conso Software

System Requirements:

 Windows

®

 7, 10

Compatibility:

 The software and firmware versions must be 

matched.

Do not write configuration files created using older versions of the 

firmware and software to controllers with Add-On features enabled 

(Ver. 2.1 & up). This can create undesirable results, especially with 

the function keys F1-F4.

Connection:

 Standard USB A to Micro-USB type B (cable included).

Configuration:

 Configure inputs and outputs, channels, totals, 

timers, alarms, etc. Configure bargraph and panel colors for normal 

operation, and colors for alarm indication. Save controller settings 

file on PC for programming other controllers or to restore settings.

Sample Data Log File

Содержание ConsoliDator Plus PD9000





































Отзывы:

Нет отзывов