Preparing the pneumatic tool
20
WARNING
Operation with unsuitable compressed air
cartridges can result in damage to the
pneumatic tool.
Only operate the pneumatic tool with type
KT-3500 compressed air cartridges.
Unscrew the sealing cap from the compressed air cartridge.
Slide the compressed air cartridge into the holders (2.).
Screw the compressed air cartridge hand-tight into the thread on
the connection element (3.).
The manometer on the connection for the compressed air cartridge
now shows the actual pressure available in the cartridge. The
pneumatic tool is ready for operation when the pointer of the
manometer is in the green area.
The manometer for the operating pressure shows the actual
operating pressure.
