After operation
40
After operation
Execute the steps described below after operation, or if you
anticipate longer interruptions in operation.
Disconnecting the compressed air supply
Remove the compressed air cartridge
Unscrew the compressed air cartridge from the connection
thread.
The compressed air contained in the pneumatic tool will dissipate
audibly.
Pull the compressed air cartridge from the rear out of the holder
on the pneumatic tool
Screw the sealing plug into the connection thread.
Keep the compressed air cartridge in the supplied transport case
where it will be protected from bumps and impact.
You can recharge the compressed air cartridge with the PKT-
FILLMASTER 350 compressor, which is available as an
accessory. You can also exchange an empty cartridge when
purchasing a full cartridge from your dealer.
Removing the compressed air hose
Pull the compressed air hose's quick coupling away from the
handle.
The quick coupling is now unlocked.
Pull the compressed air hose off of the connection on the
pneumatic tool.
The compressed air contained in the pneumatic tool will dissipate
audibly.
