PPI SOFTIE 180 Back, Инструкция по эксплуатации и упаковке

Страница: 43 / 47

41
Owners Manual - Revision 1.5
Figure 4.13.6
4.13.6. Install temporary pin in upper closing loop. Figure 4.13.6
4.13.7. Compress the Pilot chute
between the rubber bumpers and be
sure all of the Pilot chute canopy
fabric is tucked into the coils of the
spring. Thread the pull-up cords up
through the grommets in the grom-
met strap. Removing one temporary
pin at a time, Pull up the closing loops and secure the Pilot
chute in place with the two temporary pins. Figure 4.13.7
4.13.8. Close the Velcro on the top and bottom flaps.
Note:
Be sure that the hook velcro does not contact lines or canopy
fabric.
4.13.9. Close the right side flap using the temporary pin instruc-
tions from section 4.13.7. Always maintain high visibility of
temporary pins. Figure 4.13.9.
4.13.10. Close the left side flap removing one temporary pin at a
time and installing the ripcord pins. Seal the upper pin in the
accepted manner. Figure 4.13.10.
Figure 4.13.7
Figure 4.13.10
Figure 4.13.9