PPI SOFTIE 180 Back, Инструкция по эксплуатации и упаковке

Страница: 36 / 47

34
Owners Manual - Revision 1.5
Figure 4.9.4
Figure 4.9.2
Figure 4.9.3
4.9 Softie Seat
4.9.2 Lay the risers in the container and close the riser covers on the
yoke and shoulder pads.
4.9.2 Close riser channels on back pad. Figure 4.9.2
Note:
If line stows in container are required, install rubber bands on pack
tray stiffener and stow the lines according to canopy manufacturers
instructions.
4.9.3. Insert pull-up cords (two(2)) into both ends of closing loop.
Figure 4.9.3.
4.9.4. Place the skirt of the canopy approximately two (2)” be-
yond the front left corner of the container, the skirt will now be on
its side along the front of the container, with the line stows facing
toward the center of the container. Figure 4.9.4.