4
5
TOOLS REQUIRED FOR INSTALLATION
Below are some tools needed to install the operator:
ELECTRICAL INSTALLATION
To start the operator installation, a connection to the 127V or
220V mains through a symbolized power point, from a socket,
based on the official standard for sockets, (norm NBR 14136),
a standard provided with an ground conductor.
POWER CORD WITH GROUNDING PLUG
For the installation of the operator, it is provided
with a 3-pin plug. The middle pin is connected to
the metal part of the operator, which connected
to the socket is in direct contact with the network
ground wire, increasing user safety.
IMPORTANT
The equipment must be powered via a residual differential current (DR)
device with a rated residual operating current exceeding 30 mA.
PENCIL
SCREWDRIVER
SAW ARCH
FRAME
UNIVERSAL
PLIERS
ALLEN WRENCH
3, 4 AND 6mm
HAMMER
PHILIPS KEY
Ground connexion
Ground connexion
CUTTING
PLIERS
10mm CANNON
WRENCH
DRILLING MACHINE
STAR KEY
NOZZLE
PLIERS
10,13,22 and 28mm
MOUTH KEY
COMMON LEVEL
STAIRS
RATCHET WRENCH
LASER
LEVEL
