2
3
IMPORTANT SAFETY INSTRUCTIONS
Recommendation:
For the installation of the equipment, it is important that the installer
PPA specialist follow all instructions mentioned in this MANUAL
TECHNICAL and USER MANUAL.
With the USER MANUAL, the installer must present all the information,
uses and safety items of the equipment to the user.
Before using the TORE SOCIAL DOOR AUTOMATER, read and
strictly follow all instructions contained in this manual.
- Before installing the automate, make sure that the network local
electrical power complies with that required on the equipment
identification label. Connect the power cord, only to sockets
connected to the grounding network;
- Do not turn on the mains until installation / maintenance is completed
completed. Always make the electrical connections of the command
center with the electrical network turned off;
- After installation, make sure that the door parts do not fall apart
extend along the roads and the public footpath;
- Under no circumstances eliminate the grounding plug of the food.
Do not use adapters that eliminate this Ground connection. It is
mandatory to use the Ground pin.
INDEX
Important safety instructions ................................................................................................3
Tools requeired for installation ..............................................................................................4
Electrical installation .............................................................................................................4
Power cord with grounding plug ..........................................................................................5
Technical characteristics ......................................................................................................6
Installation and fixation of the operator ................................................................................6
Procedure before installation ................................................................................................7
Sizing of the door leaves ......................................................................................................8
Drilling glass .......................................................................................................................10
Installation of the lock .........................................................................................................10
Rail installation ....................................................................................................................11
Glass installation ...............................................................................................................12
Flange and pulley assembly on the frame .........................................................................14
Stop ....................................................................................................................................14
Radar ..................................................................................................................................15
Photocell .............................................................................................................................18
Connection diagram on the control board .........................................................................19
