14
HOW TO RECORD SENSOR
Figure 11 - Wireless device recording screen for sector use
Figure 11 – To record a new wireless device to act as an area protection, the device must be triggered to send
the radio frequency signal to be detected by the board. While the message “(+) Signal Sensor” is displayed on
the screen, press the (+) button to be registered in the board memory.
Displays number of
recorded devices
No signal
Waiting for device signal
Sector Sensor: x
Device registered and displays sector number
Full memory
Registration denied. Full Memory
(+) Sensor Signal
Device ready to be registered
Denied Sector: x
Device already registered and displays sector number
Messages when recording sensors after (+) button is pressed
