10
PANIC ALARM CONDITIONS MONITORING SCREEN
This screen displays the countdown timer every second for panic alarm triggering, and whether a panic key
entry has been recorded, and also whether panic alarm triggering has been recorded.
To cancel the panic alarm trigger timer and clear the two records of “Key” and “Hold” execute the alarm disarm
using the ARM/DISARM button of the user-defined control, or press the defined panic button again by the
user with the gate closed.
Figure 7 – Panic Status
Countdown clock for triggering panic alarm
minutes
seconds
When only
“Key”
text is checked, it means that the
panic key event is registered in the internal memory
of the board. If the board is turned off and on, the
delay time for triggering the panic defined by the
user will be restarted automatically.
When the texts
“Key”
and
“Hold”
are marked, it
means that the board is in a triggered panic alarm
state and is registered in the internal memory of the
board. If the board is turned off and on, a 10-sec
timer will be automatically started to trigger the
panic alarm.
