Chapter 5 Function parameter
53
Ch
ap
ter 5
374 E1.43
12 stage ac/deceleration time
selection
0 to 3
0
☆
375 E1.44 13 stage running time T13
0.0s(h) to 6500.0s(h)
0.0s(h)
☆
376 E1.45
13 stage ac/deceleration time
selection
0 to 3
0
☆
377 E1.46 14 stage running time T14
0.0s(h) to 6500.0s(h)
0.0s(h)
☆
378 E1.47
14 stage ac/deceleration time
selection
0 to 3
0
☆
379 E1.48 15 stage running time T15
0.0s(h) to 6500.0s(h)
0.0s(h)
☆
380 E1.49
15 stage ac/deceleration time
selection
0 to 3
0
☆
381 E1.50 Simple PLC run-time unit
0: S (seconds) 1: H (hours)
0
☆
382 E1.51
Multi-stage command 0
reference manner
0: Function code E1.00 reference
1: Analog AI1 reference
2: Analog AI2 reference
3: Panel potentiometer setting
4: High-speed pulse setting
5: PID control setting
6:Keyboard set frequency (F0.01)
setting, UP/DOWN can be modified
7. Analog AI3 given
0
☆
5-1-17.E2 Group - PID function
No. Code
Parameter name
Setting range
Factory
setting
Chan-
ge
383 E2.00 PID setting source
0: E2.01 setting
1: Analog AI1 reference
2: Analog AI2 reference
3: Panel potentiometer setting
4: High-speed pulse setting
5: Communications reference
6: Multi-stage command reference
0
☆
384 E2.01 PID keyboard reference
0.0% to 100.0%
50.0%
☆
385 E2.02 PID feedback source
0: Analog AI1 reference
1: Analog AI2 reference
2: Panel potentiometer setting
3: AI1-AI2 reference
4: High-speed pulse setting
5: Communications reference
6: AI1+AI2 reference
7: MAX(|AI1|, |AI2|) reference
8: MIN (|AI1|, |AI2|) reference
9: Analog AI3 reference
0
☆
386 E2.03 PID action direction
0: positive 1: negative
0
☆
387 E2.04 PID setting feedback range
0 to 65535
1000
☆
388 E2.05 PID inversion cutoff frequency 0.00 to F0.19(maximum frequency) 0.00Hz
☆
389 E2.06 PID deviation limit
0.0% to 100.0%
2.0%
☆
