Powrmatic CPx 120 Скачать руководство пользователя страница 1

 Stamm International Corporation

PO Box 1929

Fort Lee, NJ 07024

Tel: 201-947-1700

Fax: 201-947-9662

 E-mail: [email protected]

Stamm International HQ

w w w . p o w r m a t i c . c o . u k        

w w w . p o w r m a t i c . c o . u k    

®

Powrmatic Limited

Hort Bridge, Ilminster

Somerset

TA19 9PS

tel: 

+44 (0) 1460 53535

fax: 

+44 (0) 1460 52341

e-mail: 

[email protected]

web: 

www.powrmatic.co.uk

Powrmatic Ireland

45 Broomhill Close

Tallaght

Dublin 24

tel: 

+353 (0) 1452 1533

fax: 

+353 (0) 1452 1764

e-mail:

 [email protected]

web: 

www.powrmatic.ie

Getting In Touch

Powrmatic pursues a policy of continues improvement in both design and performance of its products and therefore reserves the right to change, amend or 

vary specifications without notice.  Whilst the details contained herein are believed to be correct they do not form the basis of any contract and interested 

parties should contact the Company to confirm whether any material alterations have been made since publication of this brochure.

EURO-AIR

QUALITY

ICOM

Energy Association

More information is available from our website by scanning the following QR code.

CPx

User, Installation & Servicing Manual

Issue 2.9 November 2018

Doc Ref: M201 Issue 2.9 Nov 2018

ErP

 COMPLIANT

S E P T E M B E R   2 0 1 8

 

Содержание CPx 120





































































Отзывы: