8
Fig 10
5 – Brush rotating and/or water dispensing lever
Pressing and holding lever 5 will start the rotation of the
brush. Cleaning solution will be dispensed if button 4
(Fig 9) is on. The left of right lever can be used. (Fig 10).
6 - Handle adjustment lever
Used to adjust handle to comfortable working height.
4. Operation
4.1 Checks before use
• Check that the drain hose tube of the recovery tank is
properly coupled and sealed.
• Check that the squeegee vacuum hose is correctly
coupled and inserted in the recovery tank (See Fig 11).
Fig 11
• Check that the connector (#3, Fig 12) on the squeegee
is not blocked and that the hose is connected correctly.
Fig 12
• Check the status of the battery charge by pressing
brush switch 3. (Fig 9)
• Check that the water filter is clean and free of debris
(Fig 13).
Fig 13
4.2 Preparing the machine and choosing
the cycle
• Press the brush motor button (#3, Fig 9). The light
illuminates.
• Pull the squeegee lifting lever and release it to lower
the squeegee to the floor (Fig 14).
Fig 14
The machine can perform 4 working cycles:
• Drying only cycle
Press button 2 (Fig 9) to start the vacuum.
• Brushing only cycle
Press and hold lever 5 (Fig 9). Releasing the lever
stops the brush.
• Washing, brushing cycle:
Press button 4 (Fig 9) to enable dispensing of solution.
Press lever 5 (Fig 10) to release solution onto floor.
6
5 (R)
5 (L)
