5
1.4 Guidelines for the operator
WARNING
Operators must be fully trained in the use of the
machine in accordance with these instructions,
able to perform user maintenance and the correct
selection of accessories.
• Operators should be physically capable to maneuver,
transport and operate the machine.
• Operators should be able to recognize unusual operation
of the machine and report any problems.
• Only use the machine on firm level surfaces, with no
more than a 2% slope.
• Wear suitable footwear to avoid slipping.
• Wear suitable clothing to keep dry and warm.
• Where possible implement job rotation and adequate
rest periods to avoid continuous use of the same
muscles.
• Do not leave machine running unattended
• Do not smoke when using the machine.
• Do not put any objects into openings. Do not use with
any opening blocked. Keep openings free of dust,
debris, hair, or anything that may reduce air flow.
• Keep hands and feet well clear of rotating pads and
brushes.
CAUTION
- This machine is for indoor use only
and should not be used or stored outdoors or in
wet conditions.
CAUTION
- If it is suspected that there is hazardous
dust or flammable materials stop cleaning the area
immediately and consult your supervisor.
WARNING
Only use accessories and spare parts
provided with the machine or those approved by
the manufacturer. The use of other accessories
may impair the safety of the machine and void the
warranty.
WARNING
The machine must be switched off
before adding or changing accessories.
1.5 Transporting the machine
CAUTION - THIS MACHINE IS HEAVY
Do not attempt to lift the machine without
mechanical assistance.
CAUTION
– Incorrect lifting techniques may result
in personal injury. Do not lift large and heavy
machines without assistance. Please refer to
the specifications page for details on weight of
machine.
When transporting the machine, be sure that all components,
tanks and removable parts are securely fastened, and that
the battery charging cord and plug are not trailing.
To move the machine to the work area lock handle and
tilt backwards to raise the front off the floor, and wheel
into position.
CAUTION
– Bumping over thresholds, curbs and similar
obstacles can damage the machine. Pull the
machine backwards to go over small obstacles.
1.6 Symbols & Markings
In order to highlight information and procedures regarding
safety, maintenance etc, the following symbols have been
adopted in the manual:
WARNING
GROUNDED SYMBOL
1.7 Electrical connection
Before connecting the machine to the power supply,
check that your supply voltage matches the rating on the
machine label.
IMPORTANT
- If the battery charging lead is damaged,
it must only be replaced by an approved cord available
from the manufacturer or an authorized service agent.
WARNING – THIS APPLIANCE MUST BE GROUNDED
2. Preparing for use
2.1 Connecting the batteries
• Unscrew the bolts that fasten the tank to the handle
support (Fig 1).
Fig 1
