Powerwerx DB-750X, Руководство пользователя

Страница: 35 / 46

30
DB-750X
1.
Press key to enter function menu.
2. Turn the main band selector knob to
choose No. 68 menu. The LCD displays
" PASSWd ".
3. Press the main band selector knob to enter
function setup.
4.
Switch the main band selector knob to choose desired value.
ON : Turn on password function. OFF : Turn off password function.
5. Press the main band selector knob or key to store value and
return to function menu. Press key or hold selector knob for 1
second to store setup and exit.
pASSwoRD FUncTion
TAlk ARoUnD
MicRophonE SpEAkER
When password function is on, you will be required to enter it after power
on. The password must be programmed before using this function.
7
General Setting
NOTE
BEEp VolUME conTRol
1.
Press key to enter function menu.
2.
Turn the main band selector knob to choose No. 53 menu. The LCD
displays “BP-VOL” .
3.
Press the main band selector knob to enter function setup
4.
Switch the main band selector knob to
choose desired value.
LOW: Beep volume is low.
HIGH: Beep volume is high.
5.
Press the main band selector knob or key to store value and
return to function menu.
INT : Internal speaker, VHF and UHF band share internal speaker.
Plug external speaker into the SP jack on rear of radio to hear
both bands on external speaker.
EXT : Plug the optional Y speaker cable into the ST jack on rear of
radio along with two speakers to
split VHF and UHF audio.
5. Press the main band selector knob or key to store value and
return to function menu. Press key or hold selector knob for over
one second to store setup and exit.
1.
Press key to enter function menu.
2.
Turn the main band selector knob to choose No. 55 menu. The LCD
displays “HND SPK”
3.
Press the main band selector knob to enter function setup.
4.
Switch the main band selector knob to choose desired value
HSPKOFF: Turn off microphone speaker.
HSPK ON: Turn on microphone speaker.
MSPKOFF: Turn off main speaker.
5.
Press the main band selector knob or
key to store value and return to
function menu. Press key or hold
selector knob for over 1 second to store setup and exit.
With this function on, the transceiver will transmit on the repeater
output frequency when current channel is programmed with a
repeater offset.
1.
Press key to enter function menu.
2.
Turn the main band selector knob to
No. 54 menu. The LCD displays
“ TALK ”.
3.
Press the main band selector knob to
enter function setup.
4.
Switch the main band selector knob to choose desired value
ON : Turn on Talk Around OFF : Turn off Talk Around
5.
Press the main band selector knob or key to store value
and return to function menu. Press key or hold selector knob for
1 second to store setup and exit.