19
General Setting
1.
Press
key to enter function menu.
2.
Switch the main band selector knob to
choose No. 11 menu. The LCD displays "
RX CdCS
"
3.
Press the main band selector knob to enter function setup
4.
Switch the main band selector knob to choose desired value
OFF:
Turn off CTCSS/DCS decode.
CTCSS:
Choose CTCSS decode.
dCS:
Choose DCS decode.
5.
Press the main band selector knob to enter the menu.
6.
Switch the main band selector knob to choose desired CTCSS, DCS
code.
CTCSS:
62.5 - 254.1 Hz, and one self-
defined group, total 52 groups
dCS:
000N-777I, total 1024 groups
7.
Press the main band selector knob or
key to store value and return to function menu. Press
key or
hold selector knob for 1 second to store setup and exit.
1.
Press
key to enter function menu.
2.
Turn the main band selector knob to
choose No. 12 menu. The LCD displays "
dSP SUB
"
3.
Press the main band selector knob to enter function setup
4.
Switch the main band selector knob to choose desired value.
FREQ:
display sub band frequency,
dC-IN:
display sub band voltage.
OFF:
turn off display for sub Band
5.
Press the main band selector knob or
key to store value and return to function
menu. Press
key or hold selector
knob for one second to store setup and exit.
1.
Press
key to enter function menu.
2.
Turn the main band selector knob to
choose No. 13 menu. The LCD displays "
dTMF d
"
3.
Press the main band selector knob to enter function setup.
4.
Switch the main band selector knob to choose desired value.
100MS:
The pre-loading time is 100ms
300MS:
The pre-loading time is 300ms
500MS:
The pre-loading time is 500ms
800MS:
The pre-loading time is 800ms
1000MS:
The pre-loading time is 1000ms
5.
Press the main band selector knob or
key to store value and
back to function menu. Press
key or hold selector knob for one
second to store setup and exit.
cTcSS/DcS DEcoDE SETUp
SUB BAnD DiSplAY SETUp
DTMF EncoDE pRE-loADinG TiME
CTCSS/DCS decode works in conjunction with squelch mode setup. (Refer
to Squelch Mode setup on page 20)
7.
Press the main band selector knob or
key to store value and
return to function menu. Press
key or hold selector knob for one
second to store setup and exit.
7
NOTE
