18
DB-750X
General Setting
1.
Press
key to enter function menu.
2.
Turn the main band selector knob to
choose No. 08 menu. The LCD displays "
5TN ENC
"
3.
Press the main band selector knob to enter function setup.
4.
Switch the main band selector knob to
choose desired value.
Available Values:
0-99
, total 100 groups.
This transceiver has three optional signaling functions: DTMF / 5-Tone
/ 2-Tone. These signaling functions are similar to CTCSS/DCS signaling.
When the receiver adds optional signaling, the caller shall transmit
matching signaling. DTMF and 5-Tone signaling can be applied for other
advanced features such as ANI, PTT ID, group call, select call, etc.
1.
Press
key to enter function menu.
2.
Turn the main band selector knob to choose No. 09 menu. The LCD
displays "
TON dEC
"
3.
Press the main band selector knob to
enter function setup.
1.
Press
key to enter function menu.
2.
Switch the main band selector knob to
choose No. 10 menu. The LCD displays "
TX CdCS
"
3.
Press the main band selector knob to enter function setup.
4.
Switch the main band selector knob to choose desired value
OFF:
Turn off CTCSS/DCS encode.
CTCSS:
Choose CTCSS encode.
dCS:
Choose DCS encode.
5.
Press the main band selector knob to enter the menu.
6.
Switch the main band selector knob to choose desired CTCSS, DCS
code.
CTCSS:
62.5 - 254.1 Hz, and one self-
defined group, total 52 groups
dCS:
000N-777I, total 1024 groups
5 TonE EncoDE SElEcT
ADDiTionAl SiGnAlinG FEATURE
cTcSS/DcS EncoDE SETUp
5.
Press the main band selector knob or
key to store value and
return to function menu. Press
key or hold selector knob for 1
second to store setup and exit.
if 5-Tone encode is programmed with name, the LCD will display
corresponding name.
After choosing the 5-Tone encode group, pressing PTT will transmit
selected code.
Additional signaling shall work associated with the squelch mode setup.
(Refer to Squelch Mode setup on page 20)
4.
Switch the main band selector knob to choose desired value
dT:
means DTMF signaling is added.
2T:
means DTMF signaling is added.
5T:
means DTMF signaling is added.
OFF:
Turn off optional signaling
5.
Press the main band selector knob or
key to store value and return to function
menu.Press
key or hold selector knob for 1 second to store
setup and exit.
7
NOTE
NOTE
NOTE
