Powerware BPIV, Руководство по установке и эксплуатации

Страница: 190 / 264

DESCRIPTION:
DATE:
DRAWING NO: SHEET:
REVISION:
C
1 of 5
013004
CUSTOMER INTERFACE WIRING
INSTALLATION NOTES
164201406---2
A---16
Powerware BPIV (10 kVA--30 kVA) Installation and Operation
164201406 Rev. C 013004
1.
Use Class 1 wiring methods (as defined by the NEC) for control wiring. Install the control
wiring in separate conduit from the power wiring. The wire should be rated at 150 volts,
5 amp minimum.
2.
Refer to Tables U, V, and W and to Chapters 2, 4, 5, and 6 of this manual for customer
interface wiring.
Table U. Customer Interface Inputs and Outputs
Terminal TB2 Name Description
1 BLDG ALARM 1
Programmable UPS alarm. Activated by a remote dry
2 BLDG ALARM 1 RTN
Programmable UPS alarm. Activated by a remote dry
contact closure.
3 BLDG ALARM 2
Programmable UPS alarm. Activated by a remote dry
4 BLDG ALARM 2 RTN
Programmable UPS alarm. Activated by a remote dry
contact closure.
5 BLDG ALARM 3
Programmable UPS alarm. Activated by a remote dry
6 BLDG ALARM 3 RTN
Programmable UPS alarm. Activated by a remote dry
contact closure.
7 BLDG ALARM 4
Programmable UPS alarm. Activated by a remote dry
8 BLDG ALARM 4 RTN
Programmable UPS alarm. Activated by a remote dry
contact closure.
Terminal TB4
1 CAN H
2 CAN L
Parallel CAN Input
3 RTN
Parallel CAN Input
Terminal TB5
1 Not Used
2 Not Used
3 EXTERNAL EPO
Dry contact used to activate remote EPO of UPS
4 EXTERNAL EPO RTN
Dry contact used to activate remote EPO of UPS.
5 Not Used
6 RTN
Terminal TB6
1 RELAY 1 RTN
2 RELAY 1 NO
General purpose NO and NC relay contacts.
3 RELAY 1 NC
General purpose NO and NC relay contacts.
Terminal TB7
1 RELAY 2 RTN
2 RELAY 2 NO
General purpose NO and NC relay contacts.
3 RELAY 2 NC
General purpose NO and NC relay contacts.
X-Slot 4
Terminal
1 UTIL_FAIL Input used to indicate utility power failure
2 ON_BYPASS Input used to indicate On Bypass status of UPS
3 BATTERY_LOW Contacts used to indicate Battery Low status of UPS