powersoft D-Cell504 IS, Руководство пользователя

Страница: 3 / 39

powersoft_dcell504_uguide_en_v4.0 www.powersoft-audio.com
3
D-Cell504
User Guide
SAFETY INSTRUCTIONS
CAUTION: To reduce the risk of electric shock, do not remove the cover. No user-serviceable parts inside. Refer
servicing to qualified service personnel.
WARNING: To prevent fire or electric shock, do not expose this equipment to rain or moisture.
SAFEGUARDS: Electrical energy can perform many useful functions. This unit has been engineered and
manufactured to assure your personal safety. Improper use can result in potential electrical shock or fire
hazards. In order not to defeat the safeguards, observe the following instructions for its installation, use and
servicing.
NOTES: This equipment has been tested and found to comply by Notified Body (DIRECTIVE 2004/108/EEC-EMC)
pursuant to the product family standard for audio professional use:
EN 55103-1 and EN 55103-2 standard (with the limits for E1 and E2 electromagnetic environment); EN61000– 3 – 2 , EN
61000 – 3 - 3
This is a Class B product.
This equipment has been tested and found to comply by Notified Body (DIRECTIVE 2006/95/EEC L.V) pursuant to the
audio apparatus safety requirements: Standard EN 60065.
Warning Notices
LOCATION
Install the amplifier in a ventilated enclosure (IP20 at least), where it will not be directly exposed to high temperature or
humidity.
Do not install the amplifier in a location that is exposed to direct rays of the sun, or near to hot appliances or radiators.
Excessive heat can adversely affect the operation and internal components. Installation of the module in a damp or dusty
environment may result in malfunction or accident.
PRECAUTIONS REGARDING INSTALLATION
Placing and using the amplifier for long periods on heat-generation sources will affect performances. Avoid placing the
amplifier on heat-generating sources. Install this amplifier as far as possible from tuners and TV sets. An amplifier
installed in close proximity to such equipment may cause noise or degradation of the picture
Safety rules

This device must be powered exclusively by earth connected mains sockets in electrical networks compliant to the IEC
364 or similar rules.

Is absolutely necessary to verify this fundamental requirement of safety and, in case of doubt, require an accurate check
by a qualified personal.

The constructor cannot be considered responsible for eventual damages caused to persons, things or data for the
missing of accurate earth link.

Provide the installed unit with bipolar switch to disconnect both mains connection with at least 3mm of distance of the
switch contacts.

Before powering this device verify that the module is supplied with the correct voltage rating.

Verify that your mains connection is capable to satisfy the power ratings of the device.

Do not spill water or other liquids into or on the unit.

Do not use this unit if the electrical power cord is frayed or broken.

Do not remove the cover. Removing the cover will expose you to potentially dangerous voltage.

No naked flame sources such like lighted candles should be placed on the module.

Contact the authorized center for ordinary and extraordinary maintenance.

Input mains and output power connection wirings must not to be accessible to the user.

Use this device only within the operating temperature range indicated in this manual.

A minimum clearance of 10 mm around the module is required for safety and ventilation reasons
ONLY FOR IS VERSION WITH IEC CONNECTION TO MAINS:
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
!
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
!