第 3 页 共 16 页
：
All power lines, signal lines, ground lines, wiring not to be pressed into other
objects or excessive distortion, to ensure safe use!
2 Operation Panel Instruction
2.1 Operation Panel Display Instruction
2.1.1 The operation panel composition
Operation Panel is divided with two areas
（
See Fig2-1
）：
LCD display areas and key words area.
Fig.2-1 Operation Panel
2.1.2 The LCD display
The LCD display areas are position in middle of the whole operation panel. It including pattern,
sewing mode, start/end back tacking, and foot lifter, stop-needles and trimming, and slow start
operation set. The operation system automatically
power on that HMI will a self-test,
then all icons will
flash once in the LCD display areas and only display the current settings of the system,
the other did
not choose that the icon will not be lighted, see figure 2-2.
Fig.2-2 LCD Icon
Table 2-1 LCD Icon Display Description
Index
Icon
Description
Index
Icon
Description
Automatic trimming
Intermediate stops up stop position
Soft-start function
Intermediate stops down stop
position
start back tacking
Free sewing
