11
Surge Protection
CAUTION
: Voltage fluctuation may impair the proper functioning of sensitive electronic
equipment.
Electronic devices, including computers and many programmable appliances use
components that are designed to operate within a narrow voltage range and may be
affected by momentary voltage fluctuations.
While there is no way to prevent voltage fluctuations, you can take steps to protect
sensitive electronic equipment.
1. Install UL1449, CSA-listed, plug-in surge suppressors on the outlets feeding your
sensitive equipment.
Surge suppressors come in single- or multi-outlet styles. They’re designed to protect
against virtually all shortduration voltage fluctuations.
2. Obtain an Uninterruptible Power Supply (UPS) device.
Most UPS devices come with a rechargeable battery between the electronic equipment and
power supply source. The device buffers the voltage and protects against virtually all
shortduration voltage fluctuations.
OPERATION
Starting the Engine
1. Make certain the generator is on a flat,
level surface.
2. Disconnect all electrical loads from the
generator. Never start or stop the
generator with electrical devices plugged
in or turned on.
3. Connect LPG/NG tube to the LPG tank or NG connecting tube used the clip, and
then open the gas valve slowly, till it totally open (to insure no LPG/NG leakage).
4. Pull the starter cord slowly until resistance is felt and then pull rapidly
5. If cannot start, pull the gas denser device lever lightly, and keep 1-2 seconds, then
stop, and then restart the engine.
6. If Starting the NG Engine, Move the choke lever to the “CLOSED” position. after
starter the engine, as engine warms up, move the choke lever to “OPEN”
