PowerLand PD3G10000E, Руководство пользователя

Страница: 15 / 47

11
DC Operation
The DC terminals may ONLY be used for charging 12 volt automotive type batteries.
Connecting the battery cables:
1. Before connecting the battery charging cables to a battery that is
installed in a vehicle battery, disconnect the vehicle ground battery cable from the battery
negative (
－
) terminal.
WARNING:
The battery gives off explosive
gases; keep sparks, flames and
cigarettes away. Provide adequate
ventilation when charging or using
batteries.
Battery posts, terminals and related
accessories contain lead and lead
compounds. Wash hands after
handling.
2. Connect the positive (
＋
) battery cable to
the automotive battery positive (
＋
) terminal.
3. Connect the negative (
－
) battery cable to
the automotive battery negative (
－
) terminal.
4. Make sure circuit breaker is off.
5. Start the generator.
NOTICE: Do not start the vehicle while the battery charging cable is connected and the
generator is running. The vehicle or the generator may be damaged.
An overloaded DC circuit, excessive current draw by the battery, or a wiring problem will trip the
DC circuit protector (PUSH button extends out). If this happens, wait a few minutes before
pushing in the circuit protector to resume operation. If the DC circuit protector continues to go
OFF, discontinue charging and see your authorized generator dealer.
Disconnecting the battery cables:
1. Stop the engine.
2. Disconnect the negative (
－
) battery cable from battery.
3. Disconnect the positive (
＋
) battery cable from battery.
Auto Throttle System
With the switch in the ON position, engine speed is automatically reduced when ALL loads are
turned OFF or disconnected. When appliances are turned ON or reconnected, the engine
returns to rated speed. In the OFF position, the auto throttle system does not operate.
OFF
ON
DC CIRCUIT
PROTECTOR
NEGATIVE TERMINAL
(BLACK)
POSITIVE TERMINAL
(RED)