background image

Powerex  •  150 Production Drive  •  Harrison, OH  45030  •  USA

P   1.888.769.7979  •  F   513.367.3125  •  www.powerexinc.com

IN599102AV  •  15 September 2020

Page 4 of 36

FirstCall™ Medical Gas Alarm

Operating & Maintenance Manual

Responsibilities

Information contained in this manual pertains to 

the Powerex FirstCall™ medical gas alarm system. The 

alarm system will operate as described in this manual 

when operated and serviced in compliance with the 

instructions.

Installer Responsibilities

The alarm should be handled, installed, and tested 

per the recommended practice as described within 

this manual. Should any repair or replacement become 

necessary, contact Powerex for original equipment or 

replacement parts.

User Responsibilities

The alarm should be tested and examined periodically 

according to facility codes. Any parts which are found to 

be damaged, corroded, contaminated, etc. should be 

replaced.

Introduction

Safety Guidelines

Installation of the Powerex FirstCall™ alarm involves 

installing the rough-in box, the risers & the transducers 

(if it is an area alarm or combination alarm) and front 

panel and making the necessary conduit, plumbing 

and electrical connections. All installation and testing 

should be done in accordance with NFPA 99.

Electrical power intended for the 

alarm to be installed should be 

disconnected prior to installation. 

Attention: l’alimentation 

électrique a l’intention de faire installer l’alarme devrait 
déconnecter avant l’installation.

This device should only be installed 

by  qualified  personnel.  Installation 

should not be attempted by anyone not having general 

experience with the installation of devices of this nature. 

Attention: cet appareil ne devrait installer que le personnel 

qualifié.  L’installation  ne  devrait  pas  tenter  par  une  personne 

n’ayant pas d’expérience générale avec l’installation d’appareils 
de cette nature.

Product Line Overview

The Powerex FirstCall™ medical gas alarm systems 

monitor the status of medical gases in Category 1 

healthcare facilities. The alarm systems are ETL listed to 

UL 1069 and comply with the latest edition of NFPA 99. 

All alarm systems provide audible and visible indications 

of NFPA 99 medical gas alarm conditions.

The FirstCall™ Master Alarm system monitors up to 

56 signals indicating the operation and condition of 

the source of supply, the reserve source (if any), and 

the pressure in the main lines of each medical gas 

and vacuum piping system in a Category 1 healthcare 

facility. 

The FirstCall™ Area Alarm system monitors 

the pressure of up to 8 medical gases supplying 

anesthetizing locations and other Category 1 spaces. 

The FirstCall™ Combination Alarm system monitors 

up to 56 source signals (Master) and up to 6 medical 

gases (Area) in a single panel. 

Powerex FirstCall™ Features and Benefits include:

•  Designed and manufactured in the USA
•  5 year warranty on parts, 2 year warranty on labor
•  10” high-resolution touchscreen HMI with 7” VE 

option available

•  Area alarm up to 8 gases
•  4-20mA signal transducers, DISS demand-check 

fittings, and gas risers included with Area Alarm

•  Transducers are able to be remotely installed up 

to 5,000 ft away

•  Master alarm 23, 39, and 55 input signals
•  Combination alarm up to 6 gases, 23, 39, or 55 

input signals

•  Ethernet connectivity using BACnet over IP 

protocol to building management system - 

standard

•  Customizable emergency instructions in the event 

of an alarm

•  Easy to use interface for setup and changing 

settings

•  Pre-programmed NFPA 99 gas labels and colors
•  Event history log accessible at the screen
•  Alarm test feature – able to use quickly without 

logging in

•  Area alarm automatically sets NFPA 99 +/-20% 

limits based on current pressure

•  Master alarm pre-programmed NFPA 99 source 

alarm signals – also customizable

Содержание AAP10-OAV





































Отзывы: