PowerBoozt LfeLi-48100TB, Руководство пользователя

Страница: 69 / 192

V1.01
69
Components
Part function
Grid Carries the active material and currentmade by lead alloy,The current will
equably spread in it .
Plate Plate is compiled by the grid and active material.It holds electric power. The
service life mostly depends on the plate design and characteristics .
Separator The separator has a porous design and absorbs most of the electrolyte, so
the ions can move from positive to negative plates without allowing the
battery shorting circuiting.
Separators hold the active material too
.
Valve
Keeps water,H2O inside the battery forgas recombination and only releases
gas above a certain pressure point to prevent the battery from bulging .
Container Contains the electrolyte,plates etc. Keep the poisonous out and active
material in so that the reaction could carry on. Also it helps ventilation.It is
made from strong plastic materials with insulating and anti-corrosion
properties .
Structure
•
AGM separator
The separator has a porous design and absorbs the electrolyte, so the ions can move from
positive to negative plates without allowing the battery shorting circuiting. Separators hold
some active material too.Oxygen pass through them and take a part in the recombination
reactionMost of the electrolyte is absorbed in the separator also the AGM helps to increase
the pressure when the battery is being built .
•
Multi-layer seal structure.
The unique seal design of LRC batteries ensure high efficiency of recombination reaction
over 97% with no risk of leakage .
•
Maintenace-free design