PowerBoozt LfeLi-48100TB, Руководство пользователя

Страница: 182 / 192

V1.01
182
sufficiently – 13Nm for M8 nuts and 22Nm for M10 nuts.
To avoid damage to the busbar or risk of fire, the spring washer and the flat washer should be
always be located directly under the nut.
Never place rings between: busbar and cable lug, multiple cable lugs on the same bolt,
busbar and connection plate or cable lug and connection plate.
Provide adequate strain relief on all cables.
This is to prevent too high a mechanical load on the busbar.
To avoid excessive electrical losses when using high current busbars,
the wiring must be followed a so- called “top - down” method .
To avoid excessive electrical losses when using high current busbars,
the wiring must be followed a so- called “top - down” method .
The cables for the smaller loads can then be attached to the bolts further away from them
to be mounted.
CHARACTERISTICS:
High purity tinned copper base plates ensure optimum electrical conductivity.
Optimal corrosion resistance by using stainless steel bolts, washers and nuts
Unique grid-based base dimensions allow highly compact formations of multiple DC
add products.
Special fiber reinforced plastic base offers excellent high temperature properties, good
chemical resistance and very high tensile strength.
Common connection heights allow multiple DC products to be easily connected
jumpered using connecting plates.
Robust transparent cover caps with break-out sides allow cable connections from
multiple directions.
Due to a clever terminal design, two crimp eyes can also be mounted in a mirrored manner.
Connections can be easily reached afterwards because the cover caps on the top
be locked.