PowerBoozt LfeLi-48100TB, Руководство пользователя

Страница: 126 / 192

V1.01
126
No voltage/current
loose contact.
If there is an alarm for the commutation module and the communication interruption,
plug and unplug the commutation module of the communication interruption to check
if the alarm goes off.
If the alarm continues, replace the rectifier module.
Fault monitoring
Reinstall the monitoring module.
If the alarm still sounds, replace the module.
Ambient temperature is too high
Temperature alarm parameter setting not working properly
Check the alarm value for the ambient temperature value (default 50
℃
).
If not, adjust it
The temperature control system of the cabinet, where the temperature sensor is located, is not
working properly.
Check the cabinet temperature control system.
If it is not within an acceptable range, address the interference from the temperature
control system.
When the temperature in the system cabinet returns to the normal range, turns off the
alarm automatically.
The temperature sensor is defective.
Check if the temperature sensor is faulty, if so, replace the temperature sensor.
Ambient temperature is too low
Low temperature alarm parameter setting alarm point.
Check whether the ambient temperature (alarm value: default 0 ℃ ) is reasonable.
If not, adjust it.
The temperature sensor system box in the control system is not working.
Verify that the system's cabinet temperature is acceptable; if not, act if the
temperature control system is faulty.
After the temperature in the system cabinet returns to the normal range, the alarm will
sound automatically.
The ambient temperature sensor is not working.
Check if the ambient temperature sensor is faulty and if so, replace the
ambient temperature sensor.