Power Team P2102-ANCHOR, Руководство по эксплуатации

Страница: 6 / 28

4
© SPX
Form No. 1000573
Rev. 0 February 8, 2012
The safety signal word designates the degree or level of hazard seriousness.
DANGER : Indicates an imminently hazardous situation which, if not avoided, will result in death
or serious injury.
WARNING : Indicates a potentially hazardous situation which, if not avoided, could result in death
or serious injury.
CAUTION : Indicates a potentially hazardous situation which, if not avoided, may result in minor
or moderate injury.
CAUTION : Used without the safety alert symbol indicates a potentially hazardous situation which, if not
avoided, may result in property damage.
IMPORTANT : Important is used when action or lack of action can cause equipment failure, either
immediate or over a long period of time.
Safety Symbols and Definitions
WARNING:
• The following procedures must be performed by qualified, trained personnel who
are familiar with this equipment. Operators must read and understand all safety
precautions and operating instructions included with the pump. If the operator cannot
read these instructions, operating instructions and safety precautions must be read
and discussed in the operator's native language.
• These products are designed for general use in normal environments. These products
are not designed for lifting and moving people, agri-food machinery, certain types of
mobile machinery, or in special work environments such as: explosive, flammable, or
corrosive. Only the user can decide the suitability of this product in these conditions
or extreme environments. Power Team will supply information necessary to help make
these decisions. Consult your nearest Power Team facility.
• Safety glasses must be worn at all time by the operator and anyone within sight of
the unit. Additional personal protection equipment may include: face shield, goggles,
gloves, apron, hard hat, safety shoes, and hearing protection.
• The owner of this tool must ensure that safety-related decals are installed, maintained,
and replaced if they become hard to read.
• Shut OFF the motor before opening any connections in the system.
• The guide cannot cover every hazard or situation so always do the job with SAFETY
FIRST.
Pump
WARNING:
• Do not exceed the hydraulic pressure rating noted on the pump nameplate or tamper
with the internal high pressure relief valve. Creating pressure beyond rated capacities
can result in personal injury.
• Retract the system before adding fluid to prevent overfilling the pump reservoir. An
overfill can cause personal injury due to excess reservoir pressure created when
cylinders are retracted.
• The load must be under operator control at all times.
Safety Precautions