Power Team P2102-ANCHOR, Руководство по эксплуатации

Страница: 23 / 28

ELECTRIC HYDRAULIC PUMP
Max. Capacity: 10,000 PSI
SAFETY PRECAUTION
•
All WARNING statements must be carefully observed to prevent personal injury.
General Operation
•
Before operation the pump, all hose connections must be tightened with proper tools. Do not overtighten.
Connections need only be tightened securely and leak-free. Overtightening may cause premature thread
failure or may cause high pressure fittings to split at pressures lower than their rated capacities.
•
Should a hydraulic hose ever rupture, burst, or need to be disconnected, immediately shut off the pump
and shift the control valve twice to release all pressure. Never attempt to grasp a leaking hose under
pressure with your hands. The force of escaping hydraulic fluid could cause serious injury.
•
Do not subject the hose to potential hazard such as fire, extreme heat or cold, sharp surfaces, or heavy
impact. Do not allow the hose to kink, twist, curl, or bend so tightly that the oil flow within the hose is
blocked or reduced. Periodically inspect the hose for wear because any of these conditions can damage
the hose and possibly result in personal injury.
•
Do not use the hose to move attached equipment. Stress may damage the hose and possibly cause
personal injury.
•
Hose material and coupler seals must be compatible with the hydraulic fluid used. Hoses also must not
come in contact with corrosive materials such as creosote-impregnated objects and some paints. Consult
the manufacturer before painting a hose. Never paint the couplers. Hose deterioration due to corrosive
materials may result in personal injury.
Form No. 102808
Operating Instructions for:
NOTE:
•
Inspect the pump upon arrival.
•
Read and carefully follow these instructions. Most problems with new equipment are caused by improper
operation or installation.
NOTE: These instructions cover several standard pumps. Some special units may appear different or have
different specifications. Direct any questions to an appropriate Authorized Hydraulic Service Center or our
Technical Services Department.
PE102A-220-FE
PE102A-AERO
PE102A-COR
PE102A-EMP
PE102A-ETT
PE102AR
PE102AR-220
PE104
Sheet No. 1 of 3
Rev 6 Date: 25 May 2012
PE102
PE102A
PE102-28-DC
PE102-28-220DC
PE102-28-FSC
PE102-220
PE102-ANCHOR
PE102A-220 PE104-220
PR102
PR102-AMP
P2102-ANCHOR
PR102A
PR102A-FE
PR104
PR102-HURST-EPR
WARNING
© SPX Corporation