V4.0
200A Multi-Process Welder with LCD Display
8785115
Visit www.princessauto.com for more information
15
6. Do not exceed the duty cycle or amperage required for the type of welding.
Excessive amperage can cause the deterioration of protective insulation
and create a shock hazard.
7. Unplug the welding unit when not in use as the unit as current is still
entering the unit, even when it is turned off.
8. Frequently inspect input power cable for wear and tear, replace the cable
immediately if damaged. Bare wiring is dangerous and can kill.
9. Do not use damaged, under sized or badly joined cables.
10. Do not disconnect the power cord in place of using the ON/OFF switch on
the tool. This will prevent an accidental startup when the power cord is
plugged into the power supply.
a. In the event of a power failure, turn off the machine as soon as the
power is interrupted. The possibility of accidental injury could occur, if
the power returns and the unit is not switched off.
11. Make certain the power source conforms to requirements of your
equipment (see Specifications).
POWER TOOL PRECAUTIONS
This equipment requires a dedicated 120/230 VAC, 15
amp single-phase
alternating current circuit equipped with a similarly rated circuit breaker or slow
blow fuse. Do not run other appliances, lights, tools or equipment on the circuit
while operating this welding unit.
1. Do not drape or carry coiled welding cables on your body while the cables
are plugged into the welding unit.
2. Do not start the tool when the electrode is touching the workpiece.
3. Hold the tool by the insulated gripping surfaces when performing an
operation where it may contact hidden wiring or its own cord and cables.
Contact with a ‘live’ wire will electrify exposed metal parts and shock the
operator.
4. Take work breaks to prevent the tool's motor from overheating and/or
overloading. Refer to the welding unit’s duty cycle in Specifications.
5. Keep hands away from the electrode and the area it is being applied to
when the tool is in operation.
