Power Electronics SD750FR, Руководство по аппаратному обеспечению и установке

Страница: 30 / 80

SD750FR POWER ELECTRONICS
28
RECEPTION, HANDLING AND TRANSPORTATION
EN
CAUTION
If the weight of the load to be handled is greater than the maximum permissible weight of the
crane
, it could damage the equipment and personnel.
To unpack, if necessary, unscrew the screws that fix the wooden box to the pallet. Then, unscrew the
fixing screws on the angle brackets. To lift the drive and place it in a vertical position, use only a crane
or a forklift equipped with straps or slings. Lift gently by pulling the top bolts.
To rise to an upright position, use only a crane or forklift equipped with belts or slings. Lift it carefully
pulling from the top eyebolts.
Once the drive is upright, reinsert the straps / slings. The crane or forklift must always lift the drive from
its bottom. Avoid sudden movements and blows during transportation. When placing the equipment on
the ground, stop the lowering movement just before contacting the ground, and after this, lower it very
slowly to avoid shocks.
In case of doubt about how to manipulate and transport equipment composed by several modules,
consult Power Electronics.
.