Power Electronics SD750FR, Руководство по аппаратному обеспечению и установке

Страница: 42 / 80

SD750FR POWER ELECTRONICS
40
POWER CONNECTION
EN
CAUTION
Line voltage (input supply) must never be connected to U, V and W terminals.
Otherwise, the drive may get be damaged.
It is absolutely necessary that the installer ensures correct compliance with the laws and
regulations in force in the countries or areas where the drive is to be installed.
Do not use capacitors for power factor correction, surge suppressors or RFI filters on the output side of
the drive. Doing so may damage these components or the drive itself.
All power conductors such as power input cables, output cables to the motor or DC link cables must be
separated from the control, signal, PTC, encoder or data cables. The recommended distances between
the cables are shown in the next figure: