Poulan Pro PZ4822 Скачать руководство пользователя

Страница: 66 / 75

English-

SERVICE JOURNAL

Service Journal

Action

Delivery Service

Charge the battery.

Adjust the tire pressure of all wheels to 1 bar (15 PSI).

Mount the steering controls in the normal position.

Connect the to the cables for the seat’s
safety switch.

Check that the right amount of oil is in the engine.

Adjust the position of the steering controls.

Fill with fuel.

Start the engine.

Check that there is drive to both wheels.

10. Check the mower deck adjustment.

11. Check:

The safety switch for the parking brake.

The safety switch for the mower deck.

The safety switch in the seat.

The safety switch in the steering controls.

Parking brake functionality.

Driving forward.

Driving backward.

Engaging the blades.

12. Check the idle speed.

13. Check the engine high idle speed.

14. Inform the customer about:

The need and advantages of following the service schedule.

The need and advantages of leaving the machine
for service every 300 hours.

The effects of service and maintaining a service journal on
the machine’s resale value.

Application areas for Mulching.

15. Fill in the sales papers, etc.

Date, mtr reading, stamp, sign

Delivery service has been carried
out.

No remaining notes.

Certified:

Содержание PZ4822












































































Результаты поиска

Содержание PZ4822

Отзывы:

Похожие инструкции для PZ4822

Бренды по названию

Популярные бренды

Poulan Pro PZ4822, Руководство оператора

Результаты поиска

Содержание PZ4822

Отзывы:

Похожие инструкции для PZ4822

Бренды по названию

Популярные бренды