Pottinger LION 5000, Руководство оператора

Страница: 12 / 29

0000-gb WarTung_877
GB
- 12 -
MaiNTENaNCE aND sErViCE
Advice for general maintence
In order to keep the implement in good condition even after a
longer service life, please observe the following advice.
Safety points
• Turn engine off when
adjustment, service
and repair work is to be
done.
• Do not work under the
machine without safe
support.
- Retighten all screws after the first hours of operation.
- Observe maintenance advice for spur wheel - angular gear.
- The spur wheel gear in the rotor bar is maintenance free.
Cleaning of machine parts
Attention!
Do not use high-pressure washers for the cleaning of
bearing- and hydraulic parts.
- Danger of rust!
- After cleaning, grease the machine according to the lubrication
chart and carry out a short test run.
- Cleaning with too high pressure may do damage to varnish.
Winter storage
- Thoroughly clean the machine beforehand.
- Park where protected against weather.
- Change or top-up gear oil.
- Protect all exposed sections against rust.
- Grease all greasing points according to lubrication chart.
- Do not park the machine in high waved position (transport
position)
hydraulic unit
Caution! Danger of injury or infection!
Under high pressure, escaping fluids can penetrate the skin.
Therefore seek immediate medical help!
After the first 10 operating hours and then every consecutive
50 operating hours
- Check the hydraulic unit and lines for tightness and retighten
screw connections if necessary.
Before operation
- Check hydraulic hoses for wear.
Replace worn or damaged hydraulic hoses immediately. The
replacement hoses must meet the manufacturer’s technical
requirements.
Important montage hint
The bearing axes (F) must be mounted aligned at the gears.