6-104
PFC-6030 • 5403595 • REV C-1 • 10/13
Notes
:
y
If a power supply is Class A, select the applicable NACs (NAC 1/2, NAC 3/4 or NAC 5/6).
y
If a power supply is Class B, programming is completed.
y
Class-A operation may be independently selected for the P-Link repeater output and any of the NAC circuit pairs.
4. Repeat steps, as needed, to continue creating or adding additional power supplies.
Deleting a Power Supply
To delete a power supply:
1. Select the
Power Supply function
from the system panel to display all current power supplies.
Figure 147. Example of Power Supply Window
Note
:
The Internal Power Supply may not be deleted as indicated by the message in the following dialog box.
Figure 148. Example of Dialog Box - Showing Internal Power Supply Cannot Be Deleted
2. Click anywhere in the power supply's line item, then click the
"Delete Device" button.
Tip:
You may delete more than one power supply in one step by first selecting a
range or group using Window's
SHIFT
CLICK
or
CTRL CLICK
methods, respectively.
Click anywhere in power
supply's line to select it.
