Positron 3782091C/50, Руководство пользователя

Страница: 37 / 74

Using the Composite Insulator Tester & Software
31
If the button does not turn YELLOW and read "Wait", but turns GREEN immediately, try another
port. If the button flashes YELLOW before GREEN, you have connected to the correct COM port.
If the incorrect COM Port has been selected, an error message may be returned. If so, change the
COM Port and retry.
These steps verify communication with the Tablet and the Probe’s Bluetooth RS232 Adapter. This
COM port will need to be reconnected once the unit is taken to the field for a scanning session.
It is important not to transport the Insulator Tester to the testing location with the Bluetooth
Adapter inserted in the RS232 DB9 connector. This is to avoid possible physical damage during
transport.
The buttons in the Insulator Tester Software change to GREEN once each software function
receives an acknowledgment from the Probe. If a button in the Insulator Tester Software
changes to RED after it has been GREEN, the Probe may be in sleep mode and the Push Button
of the Probe must be pressed to bring the unit into Awake Mode.
N
OTE
N
OTE