Positron 3782091C/50, Руководство пользователя

Страница: 34 / 74

Using the Composite Insulator Tester & Software
28
5.1.4 Verifying Communication Before a Testing Session
Prior to going out in the field to use the Composite Insulator Tester, testing the Bluetooth
communication between the Probe and the Tablet/Laptop is advised. This can only be done with
the PC Insulator Tester software activated. After communication has been established, the Probe
and Bluetooth adaptor can be switched off again before going out into the field.
5.1.5 Switching the Probe On
To activate the Probe, remove the Power Switch Cover and move the power switch to the right,
toward the DB-9 connector, as shown in Figure 10. The Probe will first enter the Power-On Self-
Test (POST). See 5.1.5.1 for details.
Ensure the slide switch on the Bluetooth adapter is in the DCE position. Insert the Bluetooth Serial
adapter into the DB-9 Serial port of the Probe. The Bluetooth Serial adapter is powered by the
battery of the Probe.
Figure 10
Ensure the slide switch on the Bluetooth
adapter is in the DCE position.
Location of Power
Switch Cover
Slide the Power Switch to the
right to the “ON” position,
toward the DB-9 connector
ON
Locate Power Switch
Cover and remove